Manufacturers and Exporters of Chemical plant and equipment for miscellaneous processes in India Bangladesh Nigeria Kenya Dubai Suadi Arabia Nepal

Nitration plant, chemical
Sulphonation plant, chemical
Esterification plant, chemical
Fermentation plant, industrial
Hydrogenation plant, chemical
Saccharification plant
Pyrolysis plant
Dephlegmators, chemical
Catalytic process plant and equipment
Synthesising columns, chemical
Ion exchange plant, chemical
Aeration plant, chemical
Coolers, continuous, chemical
Coolers, rotary, chemical
Coolers, spray, chemical
Coolers, fluid bed, chemical
Coolers, film, chemical
Coolers, refrigerated, chemical
Coolers for powders
Coolers for liquids, chemical
Coolers for gases
Cooling plant, air operated, processing industries
Dehydration plant for solids, chemical industry
Dehydration plant for liquids, chemical industry
Dehydration plant for gases, chemical industry
Sedimentation plant, chemical
Sludge thickeners, chemical
Sublimation plant, chemical
Sublimation furnaces, chemical
Flotation plant, chemical
Pigging systems
Impregnation plant, chemical
Injection systems, chemical industry
Absorption towers, chemical
Bleaching earth or oil separating and regenerating machines
Gas scrubbing plant
Purification plant, high purity gas
Demulsifying plant
Acid neutralisation plant, chemical industry
Acid recovery plant
Refrigerant recovery plant
Solvent recovery plant, adsorption
Solvent recovery plant, absorption
Solvent recovery plant, condensation
Solvent recovery plant, refrigeration
Solvent recovery plant, distillation
Solvent recovery plant for petrochemical processes
Solvent recovery equipment for degreasing plant
Solvent recovery equipment for paint spraying booths
Solvent recovery plant, industrial oil and fat production
Solvent recovery plant, plastics industry
Solvent recovery equipment, edible vegetable oil processing
Carbon dioxide recovery plant
Carbon monoxide recovery plant
Benzene recovery plant
Etchant recovery plant
Sodium hydroxide/caustic soda recovery plant
Copper recovery plant, chemical
Copper sulphate recovery plant
Gasoline vapour recovery plant
Hydrogen recovery plant
Pyridine recovery plant
Silver recovery plant, chemical
Silver recovery plant, X-ray material
Sodium sulphate recovery plant
Sulphur recovery plant
Sulphur dioxide recovery plant
Hydrogen purification plant, high purity
Brine purification plant, chlorine production
Pilot plant, chemical processes
Emulsifiers, hydrocarbons and water, for fuels


For further details or requirements, send Enquiry

Read More

Manufacturers and Exporters of Organic chemical production plant and equipment India UAE Bangladesh Russia USA Australia London Saudi Arabia

Acetaldehyde/ethyl aldehyde/acetic aldehyde production plant
Acetone/dimethylketone production plant
Activated carbon production plant
Amyl alcohol production plant
Anthracene production plant
Benzidine production plant
Benzene distillation plant
Benzene extraction plant
Biodiesel (vegetable oil based fuel) production plant
Bioethanol/bio-ethyl alcohol production plant
Driers, bioethanol/bio-ethyl alcohol production residues
Butyl alcohol production plant
Caprolactam production plant
Ethanolamine production plant
Ether production plant
Ethyl alcohol/ethanol production plant
Ethylene production plant
Ethylene alcohol/ethylene glycol production plant
Ethylene oxide production plant
Formaldehyde production plant
Hexamine/hexamethylenetetramine production plant
Propyl alcohol, isopropyl alcohol/isopropanol production plant
Methyl alcohol/methanol production plant
Naphthalene production plant
Nicotine and nicotine salt production plant
Nitrobenzene production plant
Oxalic acid production plant
Phenol/carbolic acid production plant
Phthalic anhydride production plant
Polyamide/nylon production plant
Polyethylene (PE) production plant
Polyolefin production plant
Polystyrene production plant
Polyvinyl chloride (PVC) production plant
Propanolamine production plant
Propylene glycol production plant
Propylene oxide production plant
Pyridine production plant
Sorbitol manufacturing plant
Styrene production plant
Tetrachloroethane production plant
Trichloroethylene production plant
Urea production plant
Detergent production plant
Surfactant production plant
Enzyme production plant
Fungicide production plant
Herbicide (weedkiller) production plant
Insecticide production plant
Adhesives production plant

For further details or requirements, send Enquiry

Read More

Inorganic chemical production plant and equipment India Banglades Nepal Kenya Nigeria

Inorganic chemical production plant and equipment India Banglades Nepal Kenya Nigeria Africa Dubai:
Alumina production plant
Ammonia production plant
Ammonia concentration plant
Ammonia oxidising equipment
Ammonia cracking plant
Ammonia distillation plant
Ammonium nitrate production plant
Ammonium sulphate driers
Ammonium sulphate production plant
Barium carbonate production plant
Barium sulphide production plant
Calcium carbide production plant
Calcium hydroxide solution production plant
Carbon disulphide production plant
Chlorine dioxide production plant
Copper oxychloride production plant
Copper sulphate production plant
Hydrogen peroxide production plant
Iodine production plant
Lead carbonate/white lead production plant
Yellow lead oxide/litharge production plant
Perborate and perchlorate production plant
Potassium chloride production plant
Potassium hydroxide/potassium hydrate/caustic potash production plant
Potassium silicate production plant
Red lead oxide/minium production plant
Silica gel production plant
Soda ash (anhydrous sodium carbonate) production plant
Sodium chlorate production plant
Sodium hypochlorite, Javel water production plant
Sodium silicate production plant
Sodium sulphate production plant
Sodium sulphide production plant
Sodium sulphite production plant
Stannous chloride production plant
Zinc oxide/zinc white production plant


For further details or requirements, send Enquiry

Read More

Pharmaceutical Machines India Nigeria Kenya Singapore

Our Products Range for Pharmaceutical : 

• Sterile Washing & Cleaning Machines  
•  High Speed Automatic Rotary Ampoule & Vial Washing Machine  
• Automatic Linear Vial Washing Machine 
• Rotary Bottle Washing Machine  
• Multijet Ampoule & Vial Washing Machine  
• Automatic Linear Bottle Washing Machine  
• Automatic Airjet & Vacuum Cleaning Machine  
• Sterilization Equipments  
• Sterilizing & Depyrogenation Tunnel  
• Dry Heat Sterilizer  
• Liquid Filling Machines  
• Automatic Vial Filling & Rubber Stoppering Machine 
• Automatic Monoblock Bottle Filling & Capping Machine  
• Ampoule Filling & Sealing Machines  
• High Speed Ampoule Filling & Sealing Machine  
•  High Speed Automatic Vial Filling & Rubber Stoppering Machine  
•  Automatic Liquid Bottle Filling Machine  
•  Lab Scale Single Head Ampoule Filling & Sealing Machine  
•   Powder Filling Machines  
•   Injectable Powder Filling & Rubber Stoppering Machine 
• Automatic Dry Syrup Powder Filling Machine 
• Dry Powder Filling & Rubber Stoppering Machine  
• Capping Machines  
•  Automatic Vial Cap Sealing Machines  
• High Speed Automatic Vial Cap Sealing Machine  
• High Speed Automatic Bottle Cap Sealing Machine 
• Automatic Bottle Cap Sealing Machines  
• Inspection Machines  
• Automatic Ampoule Inspection Machine 
• Online Vial & Bottle Inspection Machine  |
• Automatic Online Dry Powder Vial Inspection Machine  
• Labeling Machines  
•  Automatic Ampoule Self Adhesive Sticker Labeling Machine 
•  High Speed Automatic Ampoule Sticker Labeling Machine  
•  Automatic Vial & Bottle Sticker Labeling Machine 
•  Automatic Vial & Bottle Wet Glue Labeling Machine  
•  Manufacturing Plant/Process Equipments  
•  Water for Injection Plant  
•  Syrup Manufacturing Plant 
•  Ointment/Cream Manufacturing Plant 
•  Cream/Gel/Toothpaste Processing System  
•   Filter Press
•  Sterile Manufacturing Vessel  
•  Capsule Section Machines  
•   300 Holes Manual Capsule Filling Machine 
•  Semi Automatic Tablet & Capsule Counting Machine  
• High Speed Automatic Capsule Filling Machine  
• Automatic Capsule Loader  
• Automatic Capsule Filling Machine - R&D Model
• Capsule Inspection & Polishing Machine  
•   Semi-Automatic Capsule Filling Machine  
•  Tablet Section Machines  
•  Rapid Mixer Granulator 
• Fluid Bed Dryer 
•  Multi Mill  
• Vibro Sifter
•  Octagonal Blender  
• Double Cone Blender  
• Tablet Press Machine GMP Model 

For further details or requirements, send Enquiry

Read More

Ylem supplying and exporting multi column distillation plant, water injection plant, dry heat sterilizers, fluid bed dryer, rapid mixer granulator, octagonal blender, multi mill, cone blender, colloid mill, liquid manufacturing vessel, sterile manufacturing vessel, lotion manufacturing vessels, creame manufacturing vessels, ointment manufacturing vessels, rotary bottle washing machine India Nepal Singapore Nigeria

Ylem engaged in supplying and exporting of following items :

• Multi column distillation plant, 
• Water injection plant, 
• Dry heat sterilizers, 
• Fluid bed dryer, 
• Rapid mixer granulator, 
• Octagonal blender, 
• Multi mill, cone blender, 
• Colloid mill, 
• Liquid manufacturing vessel, 
• Sterile manufacturing vessel, 
• Lotion manufacturing vessels, 
• Cream manufacturing vessels, 
• Ointment manufacturing vessels, 
• Rotary bottle washing machine,
• etc

For further details or requirements, send Enquiry

Read More

Ylem are manufacturers and exporters of quartz water distillation unit, water distillation unit suppliers, quartz water distillation plant, water distillation plants India, steel water distillation plant India, quartz water distillation unit India, water distillation unit manufacturers India, water distillation plants suppliers

Ylem multi column distillation plant is based on latest technology and it produces pyrogen free sterile water (W. F. I.) which meets the requirement of Indian, British & United States Pharmacopoeia. 



Available from 50 ltrs/hr (Lab Model) to 3000 ltrs/hr.
The WFI produced by these plants is quite economical due to low maintenance and low operational cost.

Special Features :

• All contact parts are of SS 316 / SS 316 L quality and are electropolished. 
• All fittings, sanitary tri-clover type. 
• Double safety provided in the first column as boiler steam is present there. 
• PLC based fully automatic panel board provided with printer. 
• The design is compact & economical. 
• Guarantee for columns and free replacement will be given if columns will be found cracked

For further details or requirements, send Enquiry

Read More

Manufacturer & Exporter of extraction unit, solvent extraction units, solvent extraction plant and extraction machinery

Manufacturer & Exporter of extraction unit, solvent extraction units, solvent extraction plant and extraction machinery


For further details or requirements, send Enquiry

Read More

Field Distillation Units (FDU) India Nepal Bangladesh

Essential Oils are the true essence of the botanical plant or plant part. They are the Volatile oils extracted by distillation of part of botanical plant 

• flower
• Seed
• Leaves
•  Bark
•  Wood
•  stem
•  Grasses
•  rhizome 
•  roots

Essential oil plants are supplied in stainless steel as well as mild steel depending on the oil to be extracted. The plant in Mild steel distill common essential oils such as Lemongrass Oil, Eucalyptus oil, Mentha oil, Citronnela oil, Palmrosa oil etc. 
These oil plants in mild steel are easy to install and operate. These are widely used as field distillation units(FDU) because they are installed right in the fields in remote areas.


For further details or requirements, send Enquiry

Read More

Essential oils are widely used in food & flavour industry, Cosmetics, Perfumery products & aroma therapy.

Essential Oils are the volatile oils extracted from botanical plant part. They are extracted by distillation of botanical plant part.such as flower, Seed, Leaves, Bark, Wood, stem, rrhizome or roots or simply aromatic grasses like lemongrass etc..

These steam distillation plants are used for distillation of following Essential Oils:-

• Sandalwood oil
• Rose oil
• Agarwood oil- Oud oil
• Kewda oil ( Pandanus Odoritissimus)
•  Patchouli oil
•  Vetiver Oil
•  Frankinsence oil ( Olibanum oil) and more.

Distillation Plant are supplied in stainless steel construction for trouble free long life.

Essential oils are widely used in food & flavour  industry, Cosmetics, Perfumery products & aroma therapy.

Our plants are designed for giving the best quality of oil , free of burnt odour, free of moisture as well as highest yield of essential oil. 

Our stainless steel essential oil plants incorporate advanced technology. They are  extremely durable, corrosion resistant & easy to operate. 

For further details or requirements, send Enquiry

Read More

essential oil plants, essential oil plants in ss for patchouli etc., essential oil plant for lemongrass etc., rose oil / rose otto distillation plants supplier, ginger oil & other spice oil plants manufacturer

Supplier and Manufacturer of Essential Oil Plants, Essential Oil Plants in SS for Patchouli etc., Rose Oil / Rose Otto Distillation Plants, Essential Oil Plant for Lemongrass etc.  Ginger Oil & Other Spice Oil Plants

For further details or requirements, send Enquiry

Read More

Essential Oil Distillation System Manufacturers in India Bangladesh Nepal Kenya Nigeria Dubai UAE U.K. London

• Field Distillation Unit Manufacturers Exporters India
• Oil Distillation
• Oil Distillation Plants
• Field Distillation Unit Manufacturing company
• Essential Oil Distillation
• Oil Distillation Plant
• Essential Oil Extraction Systems
• Vacuum Essential Distillation Systems
• Aroma Distillation System
• Vapor Extraction Systems

For further details or requirements, send Enquiry

Read More

Rotary Kiln Manufacturer Exporter Supplier in India Dubai UAE Iran Nigeria Kenya USA Bangladesh

Ylem Parto Rotary Kilns are used to heat solids to the point where a required chemical reaction takes place. The Rotary Kiln is basically a rotating inclined cylinder, solids retention time in the kiln is an important factor and is set by proper selection of diameter, length, speed, slope and the internal design.

Standard Construction Features : 
Rotary Kilns are normally direct fired and lined with refractory material to protect the steel shell, reduce radiation losses and transfer heat to the material. A typical Rotary kiln is cylindrical shell, slightly inclined from the horizontal and supported on two or more tyres, which in turn rotate on rollers. One of the tyre is fixed axially by a set of thrust rollers to care of the thrust load during kiln movement. The drum assembly along with the tyres are rotated by a girth gear/ pinion arrangement. Shell diameter and length are generally designed to suit specific products.

 Heat Transfer in Rotary kiln : All kilns are heat exchangers and the heat is transferred in a variety of ways by radiation, convection and conduction.The most effective way of transferring heat is by gas radiation from the hot flame and a smaller amount of transfer from refractory. The hot bricks transfer by radiation to material and also by conduction to the charge

Sealing arrangement : 
A seal is essential at each end to prevent ambient air from entering the process. Air leakage can have varying effects on different process. Sometimes it reduces efficiency and sometimes it can create unsafe or unstable conditions. To maintain proper control of the volume and temperature of gases flowing through the kiln it is necessary to limit the leakage of the cold air in the kiln particularly where the rotating shell enters the feed and the discharge end hoods. Seal rings are provided for this purpose. Various types of seal rings are used which include spring loaded types, where two finished metal surfaces are in contact under spring pressure. The sealing segments require regular adjustment and replacement.

Refractory : 
Because of high temperature and abrasive material liner is required and call it as refractory. Refractory is installed as solid block to fit in to different areas tightly in round formation from sliding or falling out. There are many types of bricks in different composition and have different properties such as insulation value, maximum temperature and resistance to wear. Areas where brick can not be used liquid refractor called castables are used with anchor support. Kiln can also have insulation material under the brick and this extra layer helps to reduce shell losses.

Bearings & Drive Components :
The most common drive components are gear reducers. Gear reducers are used when reduced speed or increased torque is required. Gear reducers can be designed differently for applications. Rotary Kilns are normally gear driven through girth gear mounted over the shell on gear support base, assembled on a section of the shell away from the shell end where high temperatures are encountered. To compensate the thermal expansion the girth gear is mounted on tangential spring plates attached to the shell. The driving pinion is mounted on the output shaft of a worm / helical gear unit.

Bearings are in every moving piece of equipment. Bearings are also uniquely designed for there application. The most common bearings are the anti-friction or roller bearings. These bearings have become standardized and perform excellent in almost any condition. Anti-friction bearings do not work well with heavy loads. Different kind of bearing are used on the kiln where high loads are seen.

Firing System :
The burner system is an important and an integral component of a rotary kiln system to optimize the combustion of fuels to release heat in the kiln. Safety considerations, ease and flexibility of operation, product quality, energy efficiency, maintenance costs, and the environmental impact of the products of combustion are some of the most critical areas that a kiln operator must evaluate in selecting a kiln burner. In a rotary kiln application heat is injected directly in the end of the kiln. Firing systems could use any kind of fuel and be of any size. The burner is where the fuel is ignited. The fuel could be mixed with air before or in the burner. The flame temperature is a factor of fuel type, fuel/air ratio, and other burning conditions.

Dust Collecting Equipments :
Exhaust gases from an oil fired kiln contain certain proportion of very fine dust which becomes entrained in the air stream while in contact with materials being calcined. A Dust collector of high efficiency cyclone type is used. Even the most efficient cyclone type dust collector will not collect all the dust. Very fine particles which escape the dry collector may be recovered by mean of a wet collector in the form of sludge or alternatively by means of a Bag Filter

Application :
Rotary Kilns are used for the calcinations of Titanium dioxide, Illuminate, Kaolin, Barium Carbonate, Magnesium Carbonate, Silica Gel, Lime, Activated carbon, Vermiculite, Barium Sulfide, Magnesium oxide, petroleum coke, clay, gypsum, Alumina etc.

Our Products:

• Tunnel Kiln
• Cement Kiln
• Lime Kiln
• Brick Kiln

For further details or requirements, send Enquiry

Read More

Incinerator Manufacturer in India U.K. Russia Nigeria Dubai Kenya Bangladesh Nepal

Ylem Parto incineration of waste constitutes the final stage and perhaps the most comprehensive stage after waste reduction, recycling and clean-up. A typical incinerator is dual chambered refractory lined furnace. The two chamber work under varying conditions of temperature, pressure and combustion configuration. The primary chamber operates under Starved Air or Pyrolysis mode and the Secondary chamber works under 'Excess Air' mode. The incineration chambers are lined on the inside with hot face-high aluminia refractory and cold face-insulation bricks with sturdy steel frame on the outside. High combination efficiency is ensured by dedicated chamber temperature interlocked Oil / Natural Gas fired automatic burners. Every incinerator is provided with a tailor made flue gas management system to remove gaseous pollutants before discharge to the atmosphere.

 Our Products:


Combustion Incinerator
Direct Flame Incinerator
Fluidised Bed Incinerator
Liquid Injection Incinerator
Multiple Hearth Incinerator
Rotary Kiln Incinerator



For further details or requirements, send Enquiry

Read More

Furnace Manufacturer in India U.K. Tehran Sri Lanka Bangladesh Nepal

Type of Furnace Manufacture :

• Induction Furnace
• Blast Furnace
• Cupola Furnace
• Regenerative Furnace
• Industrial Furnace
• Muffle Furnace
• Multiple Hearth Furnace
• Rotary Furnace
• Reverberatory Furnace
• Bell Furnace
• Gas Powered Furnace
• Vertical Furnace
• Car Bottom Furnace
• Carburizing Furnace
• Forge Furnace
• Sintering Furnace
• Electrical Heating Furnace

For further details or requirements, send Enquiry

Read More

Autoclave Manufacturer Exporter Supplier in India Bangladesh Nepal Tehran U.K. Sri Lanka Australia

Ylem Parto manufacture AUTOCLAVE used for Rubber reclamation/Ceramics/Metals/Sterlisation industry for high temperature and high pressure.


Various models are available in capacity 2000, 3000 and 3500 kgs/batch.
The Auto Clave is made from boiler quality plate with limpet coil heating with hollow agitator with blades driven by motor and gear box for agitating the material inside.



This Auto Clave is designed to work at a pressure of 300 psi. and at a temperature of 250°C.



For further details or requirements, send Enquiry

Read More

Spray Dryer Manufacturer Exporter Supplier in India Bangladesh Nepal Iran U.K. USA Kenya Nigeria

Ylem Parto Spray Dryers are relatively simple in operation which accept feed in fluid state and convert it into a dried particulate form by spraying the fluid into a hot drying medium.

Food atomization is done using high pressure nozzle, high pressure air, two fluid nozzles or centrifugal disc atomiser. The heating of drying air can be of either steam coils or thermic fluid or air heater according to the service conditions available. The hot air is distributed into the chamber from top by an air dispenser.

The final product is taken out from the spray dryer along with air to a cyclone separator for fines separation and the final powder gets collected at the bottom. Additional systems like fines recycling into the chamber for agglomeration, powder cooling, conveying, storage & bagging can also be supplied

For further details or requirements, send Enquiry

Read More

Fluid Bed Dryer Manufacturer Exporter Supplier in India Iran U.K. United States of America USA Bangladesh Nigeria Nepal

Ylem Parto fluid Bed is designed to dry products as they float on a cushion of air or gas.These dryers find extensive application in chemical, food, dyestuff, and polymer industries for fast and efficient drying. The contact parts of the dryers are made using SS 304 and 316 grades.

Our fluid dryers integrate fully automatic control panel box with process timer, pneumatic lifting of container, digital temperature controller cum indicator, pneumatic finger bag shaking, voltmeter, ammeter and earthing system.

Operation:
• Due to induced draft created by specially designed heavy-duty fan, the atmospheric air is drawn through air filter
• The filtered air is then heated to the required temperature by electric/ steam radiator
• The hot air passes through the product container and the product is dried by air fluidization
• The air circulation is controlled by damper
• The filter bag prevents fine particles from carrying over to exhaust air stream
Selection:
• Selection of capacity of fluid bed dryer depends upon bulk density, drying temperature and moisture contents of wet material to be dried
• In case of 120 Kg model a batch of 145 Kg wet material can be loaded provided the bulk density of the material is 0.6 Kg. /Lit. (Approx)
• Pharmaceutical granules with 20-25% moisture can be dried in 30-45 minutes at 800 C approximately
Optional:
• Available in standard and GMP model with SS 304 / SS 316 quality
• Pneumatic container lifting and bag arrangement
• Intrinsically safe earthing system
• Flame proof motor and electrical
• Hepa filters can be provided on demand

Salient Features:
• Better productivity and lesser drying time with less handling
• More hygienic
• Uniform drying at low temperature
• Static grounders to eliminate electro static charges
• SS Product container with trolley & tilting arrangement
Capacity: 5 -300 Kg


For further details or requirements, send Enquiry

Read More

Rotary Dryer Manufacturer Exporter Supplier in India Iran Bangladesh Nepal U.K. United States of America Nigeria Kenya

Ylem Rotary Dryers and Rotary Coolers are widely used in the Industry for drying / cooling of reasonably free flowing materials.

Ylem Rotary Drying Systems with various configuration.

DIRECT ROTARY DRYERS & COOLER

• Process : Material to be dried / cooled comes in direct contact with the drying / cooling media.

• Mechanism :Dryer consists of a rotating shell supported on rollers / tyres and driven by means of suitable drive arrangement. Drying / Cooling media (Air / Gas) is admitted through stationary hood at one end & taken out from stationary hood from other end. 
• Feeding : Feed is admitted through suitable feeding mechanism like Screw feeder or Chute. 
• Louvers : The rotating shell is provided with specially designed material showering mechanism like Lifters / Garland Chains etc. 
• Inclination : Shell inclination & rotating speed facilitate forward movement of the material towards discharge end providing required residence time. 
•  Heat Transfer : Drying (or Cooling) takes place by heat transfer to (or from) showering material with the drying (or Cooling) media within the shell. Product is discharged from the stationary hood through suitable equipment like Flap Valve / Rotary Valve / Screw Conveyor / Chute. 

Air Flow Configurations :

• Co-Current Flow
• Counter-Current Flow

Air Heating System Configurations :

Fuel Type : Direct / indirect fired air heaters using liquid / gaseous/solid fuels.
Heating Media : Direct / indirect fired air heaters using solid fuels, agro waste, saw dust, rice husk, coal, briquette etc.
Heaters Type : Indirect air heaters such as using steam / hot oil / thermic fluid/electricity.
.

Product / Fines Recovery System Configurations :

Cyclone Separators: Mono, Twin, Quadruple, Multi etc.
Bag Filters: Reverse Pulsejet, Mechanical shaking etc.
Wet Scrubbers – Direct Contact Ventury, Adjustable Ventury, Packed scrubbers etc.

Optional Features Configurations :

Feed material conditioning.
Back mixing of product with feed material.
Pneumatic conveying system and finish product handling.
Computerized control system through PLC / DCS & SCADA.

IN-DIRECT ROTARY DRYERS :
The material to be dried does not come in direct contact with the drying media.

The dryer comprises of an assembly of two concentric rotating shells supported on rollers / tyres and driven by means of suitable drive arrangement. Feed is admitted through suitable feeding mechanism like Screw feeder / Flap Valve into the dryer through stationary feed hood. The drying media is admitted through the inner shell & travel towards discharge end & again returns towards feed end through specially designed return gas passages on the inside of outer shell. The inner shell is also provided with suitable radial lifters. These lifters along with return passages geometry is designed for showering of feed material. Shell inclination & rotating speed facilitate forward movement of the material towards discharge end providing required residence time. Drying takes place by heat transfer to the showering material by direct contact with inner shell & return passages. Product is discharged from the stationary hood through suitable equipment.

Air Heating System Configurations :

Direct Fired Air Heaters : Using Liquid / Gaseous Fuels.
Direct Fired Air Heaters : Using Solid Fuels, Agro Waste, Saw Dust, Rice Husk, Coal, Briquette etc.

Product / Fines Recovery System Configurations :

Cyclone Separators: Mono, Twin, Quadruple, Multi etc.
Bag Filters: Reverse Pulsejet, Mechanical shaking etc.
Wet Scrubbers – Direct Contact Ventury, Adjustable Ventury, Packed scrubbers etc.

Optional Features Configurations :

Feed material conditioning.
Back-mixing of product with feed material.
Pneumatic conveying system and finish product handling.
Computerized control system through PLC / DCS & SCADA.


For further details or requirements, send Enquiry

Read More

Tray Dryer Oven Manufacturer Exporter Supplier in India Dubai UAE Africa Nepal Bangladesh Iran Tehran U.K.

Ylem Parto offer tray dryer and ovens that is used for the best drying results in conventional process. Designed in compliance with the international quality standard, the dryer has a double walled cabinet with one or two doors. To avoid heat transfer, the gap between two walls is filled with high-density fiber glass wool insulation material. Stainless steel trays are placed on the movable trolley.

Features:
• Doors are provided with gaskets
• Stainless steel trays are placed on the movable trolleys
• Dynamically balanced axial flow type blower fans are provided for uniform air circulation in the drying chamber during process
• Machine is provided with control panel board with process timer
• Digital temperature controller cum indicator
• Standard & GMP models available with SS 304/ SS 316/ MS internals & externals
• Stainless steel tray in SS 304/ SS 316 quality
• All stainless steel 304 / 316/ 316L construction for pharmaceutical applications or external mild steel with SS internal contact parts
• Electric, steam, thermic fluid heating
• Control panel board with process timer (Circular chart recorder can be provided on demand at extra cost)
• Sturdy trolleys with castor wheels
• Air filter at inlet (Hepa filter can be provided on demand at extra cost)
• Easy accessibility of impellers for cleaning
• The exhaust duct, blower & air inlet filters can be custom built to keep out of the production area with suitable ducting./


TECHNICAL SPECIFICATIONS:
• Model : 6 / 12 / 24 / 48 / 96 / 192.
• Tray Size : 16" x 32" x 1.25"
• All required electrical switch gears are of L&T / Siemens / BCHL make.
• Tray material : Aluminum/SS304/SS316
• Fan motor : 0.5 / 1.0 / 1.0 / 2.0 h.p.
• No. of Fan : 1 No. / 1 No. / 2 Nos / 4 Nos.
• Temp. Range : up to 100 degree C.

SPECIAL FEATURES:
• Designed for uniform circulation of hot air in the drying chamber.
• Electrical / Steam / Oil Heating mode.
• Inside surface is painted with heat resistant aluminum paint and out side with synthetic enamel.

For further details or requirements, send Enquiry

Read More

Heat Exchanger Manufacturer Exporter Supplier in India Sri Lanka Dubai Bangladesh Nepal Iran U.K. United States of America

Ylem Parto design, manufacture all types of industrial heat exchangers . Our team have a wonderfull wide knowledge and well experienced in deciding the design as per your requirements.

Our device built for efficient heat transfer from one fluid to another, whether the fluids are separated by a solid wall so that they never mix, or the fluids are directly contacted. They are widely used in petroleum refineries, chemical plants, petrochemical,etc.



Material of Construction (MOC):
Heat Exchangers are fabricated in Hastealloy, Inconel, all grade of Stainless Steel & Carbon Steel & any other weldable material operating in moderately high pressure and temperature rangets, natural gas processing, refrigeration, power plants, air conditioning and space heating.

Types of Heat Exchanger:


Shell & Tube Heat Exchanger
Fluid Heat Exchangers
Phase Change Heat Exchangers
Waste Heat Recovery Unit
Fluid Heat Exchangers


Condenser :
Ylem Parto manufactures various types of shell and tube condensers, shell and tube heat exchanger from standard fixed tube shell type to floating head or "U" tube bundle to suit different process conditions with strict quality assurance and in full compliance with international code and code like ASME and TEMA.

Standard Types of Condenser:
Fixed Tube
This type is commonly used than any other type. The tube plates are welded to the shell and serve as flanges to which the channels and covers are bolted and there is no limitation on the number of tube side passes. The tube bores can be cleaned mechanically or chemically but the outside tube surface are inaccessible except to chemical cleaning

U Tube:
The tube bundle consists of stationary type plate U-tubes baffles, tie rods and spacer. The thermal expansion is absorbed by the U-bends. Tube bundle can be removed from the shell for cleaning or maintenance but internal cleaning is difficult and it is applied where the tube side fluids are clean.

Floating Head /Straight Tubes :
Suitable to rigorous duties. The tube bundle consists of straight tubes expanded on to tube plates of each end. The floating head is fitted to the tube plate remote from the channel and the cover is held in position by a split backing ring. The tube bundle is easily removed for cleaning or maintenance.


Packed Gland Floating Head : 
The shell and tube side fluids are separated at the floating head end by a circular lantern ring which fits round the floating tube plate and is packed by two glands, one on the tube side and one on the shell side. The lantern ring is grooved on the inside face and drilled radically with vent holes, thus leakage from either gland is apparent from outside inspection and the fluids are prevented from mixing, since they can leak to waste and not in to one another.. the tube bundle can be withdrawn for cleaning and tube replacement is simple. The presence of the packed gland in this construction makes it unsuitable for volatile or toxic fluids




For further details or requirements, send Enquiry

Read More

Fume Extraction System Manufacturer Exporter Supplier in India Bangladesh Iran Dubai United States of America U.K.

Ylem Parto fume extraction system is the real solution for Green Revolution. With the increase in discharge of hazardous waste from various chemical process, Environmental Safety has been a great concern. At present the increase environmental awareness requires a good scrubbing and fume extraction system which is inevitable and mandatory part of all chemical process as well as material handling plant that may pollute atmosphere beyond permissible limit.

Industries which need fume extraction system: Acid manufacturers, Aluminum Plants, Acid Wash Plants, Iron Ore, Chemicals, Foundaries, Paper and Pulp, Fertilizer, Acid Washing before Galvanizing, Galvanizing Plants, Waste Water Treatment.




Following are some of its essential features:

• Corrosion resistant
• Dimensionally accurate
• Durable
• High in performance
• Cost effective
• Perfectly suitable for temperature (up to 450 C) dust & all types of fumes




For further details or requirements, send Enquiry

Read More

Dust Extraction System Manufacturer Supplier Exporter in India Nigeria Dubai United States of America Bangladesh Iran Tehran

Ylem Parto plants are exclusively directed towards chemicals processing and Metals Industry where acid or gas fumes are generated as a part of production processes which need to be recycled or cleaned before discharging to atmosphere.

In Steel mills pickling lines are installed to clean the steel products by acid cleaning ,and protect their surfaces by acid based processes such as passivating , phosphating , galvenizing etc. During these processes acidic fumes are generated from the pickling lines which harm the personnel and the environment .
In Chemicals or Fertilizer Industry , fumes are generated which have to e cleaned before discharging to atmosphere.


 Our Fume control plants are scrubber based and clean and scrub the fumes before being let out to the environment.



For further details or requirements, send Enquiry

Read More

Bag Filter System Manufacturer Exporter Supplier in India Nepal Noida Iran United States of America U.K. Bangladesh

Ylem Parto offer pocket shaped pulse jet bag filters that are extensively used for various industrial applications. Their superior designing and construction makes them efficiently perform the task of dust collection. We offer them in:

1. Manual shaking type.
2. Motorized type.
3. Reverse pulse jet type

 Process:

• Compressed jet air which passes through the filter does the work of cleaning the dust & making it fall through hopper, towards the bottom enabling it to get discharged via rotary feeder for dust collection

• . The air tank helps in keeping the compressed air at 5-6 Bar pressure and releases it
through solenoid valve which opens as per the sequential timer.

• All bags are cleaned for further use.


Features:

Efficiently perform the task of collecting the dust at the bottom ensuring clean air for the
Exhaust.



For further details or requirements, send Enquiry

Read More

Cyclone System Manufacturer Exporter Supplier in India Bangladesh Nepal Iran Dubai UAE

Dust Collection SystemYlem Parto dust collector is most advanced with constant R&D in design, technology and upgradation to next level. The filter media is placed inside of the dust collector and is chosen depending upon the application. The suction air stream by the blower from source point is passing in the dust collector. The filter media is placed in the path of air stream. The dust particles stopped in the dust collector by the filter media, and form a dust cake on the incoming surface of filter media. And as more dust particles collect on the filter media, the thickness of the dust formation is increased. This increase shows our dust collector efficiency. The two main functions of media filters are : (i) To stop dust particles on its surface while allowing clean air molecules to pass through and, (ii) To provide easy release of the dust particles during cleaning.The high efficiency of these collectors is due to the dust formed on the surface on which dust particles collect through the following four mechanisms :

(1)Inertial collection
Dust particles strike the fiber filters placed perpendicular to the gas flow direction instead of changing direction with the gas stream.

(2)Interception
Particles that do not cross the fluid streamlines come in contact with fiber filters because of the size.

(3) Brownian movement
Sub micro particles are diffused, increasing the probability of contact between the particles and collecting surface.

(4) Electro static forces
The presence of electro static charge on the particles and the filter can increase dust capture.


APPLICATIONS:

Cement plants, Jeweler manufacturing units, powder manufacturing units, wooden work places, textile mills etc..,
Reverse Jet Filter
Pulse- Jet Fabric Dust and Fume Collector

For further details or requirements, send Enquiry

Read More

Scrubber System Manufacturer Exporter in India Nepal Bangladesh Iran Dubai UAE

Fume & Gas Scrubber System Ylem Parto offer wide range of fume scrubbers for removal and washing of acidic fume laden air coming out of various industrial processes. Our scrubbers are used for chemical production, metal finishing, semiconductor manufacturing as well as in other operations related to generating fumes and gases. These are made of best raw materials i.e. in M.S & S.S. that provides them a great strength and durability and are offered to clients at the most competitive prices. Some of the most common applications of the same are: • Pickling • Chrome Plating • Zinc Plating • Moulding It is available in the following sizes and air volume: • Sizes: 600 mm dia to 3000 mm dia • Air Volume: 3000 m3/h to 60,000 m3/h We also offer wet collectors used for separation of particulate matter having moisture from dust laden air to remove aerosols & gasious pollutants from an air stream & air purification along with dust collection.

Contaminant removal is achieved by absorption of gases and vapors, condensation of condensable vapors and impaction of aerosols. All mechanisms occur in a packed bed for intimate gas-liquid contacting. Contaminants transferred to the liquid phase are removed from the scrubber by continuous or periodic overflow of blowdown.
Packed Bed Wet Scrubber. Horizontal crossflow design minimizes height requirement and is ideal for roof mounting with remote recirculation. Standard unitsup to 63,000 CFM.

MIST ELIMINATION :Turbulent gas-liquid contacting causes some droplets to become entrained in the air. The mist eliminator collects these droplets that would otherwise be ejected from the scrubber.

WATER SUPPLY :All fume scrubbers must be supplied with water. It is generally recommended that a recirculation system be used to conserve water unless once through water is advantageous to meet performance requirements. The actual fresh-water consumption with recirculation is only 0.1 to 0.7 gpm/1000 cfm* depending on the contaminant involved.

BLOWER SECTION: The top section of the fume scrubber consists of a centrifugal blower complete with motor and belt and shaft guards. The blower section may be rotated through 360° to obtain any desired angle between scrubber inlet and blower outlet. This blower section utilizes the same low maintenance, guaranteed corrosion-resistant blower.


We provide single source solution for highly durable and efficient Packed Bed Scrubbers.
• A Packed Bed Scrubber is a wet type scrubber that removes soluble chemicals, fumes, and odors. Contaminated gas flows through a specially designed packing media that is wetted with recirculated liquid.
• The liquid solvent absorbs the gas pollutant by physical or chemical means. A blowdown from the tank with makeup water addition removes contaminant products before they precipitate.
• Ylem Parto offers complete in-house fabrication and engineering services to provide high quality solutions at a low price. Our supports its customers with installation, start-up assistance, training, and field service.
• Each Packed Bed Scrubber is sized and designed for specific customer requirements. We will evaluate fume removal applications to determine the optimum design parameters for each installation.

Features
• Construction available in FRP, PVC, CPVC, polypropylene, polyethylene, mild steel, stainless steel, FRP-lined mild steel, nickle alloys and titanium.
• Wide range of packing media including rings and saddles in various materials. Structured packing is also available.
• Complete instrumentation and electrical controls are available for stand alone operation or connection with a facility’s centralized control or monitoring systems.
• Chemical treatment, including oxidation and neutralization, is available to increase absorption of gaseous pollutants.
pH control available when applicable.
• Corrosion resistant AMCA rated fan on the inlet or outlet side of the scrubber.
• Corrosion resistant recirculating pumps for scrubber liquid recirculation.
• Non-plugging spray nozzles for wetting packing in a wide range of corrosion resistant materials. Special liquid distributors may also be used.
• Moisture eliminators with chevron, mist pad, or loose fill type designs.
Efficient Design
Ylem Parto Packed Bed Scrubbers are custom designed to meet or exceed the specific removal efficiency required for each customer’s application and process.We can also provide a process simulation for difficult or unique scrubbing system applications.We will optimize the performance of each unit by thorough evaluation of relevant parameters.

We will analyze:
• Contaminant solubility
• Vapor pressures
• Wash liquid flow rate
• Liquid to gas ratio
• Packing chamber height, diameter, and volume
• Packing media type and size
• Chemical additives
• pH control
• Precipitation of reaction products
• Multiple solution scrubbing
• Required scrubbing stages
• Pressure drop across packing
• Materials of construction
• Site requirements

General Information
• Capacities: 10 to 75,000 CFM with a single unit
• Efficiencies to 99.99%
• Vertical and horizontal models
• Counter-flow or cross-flow models
• Rectangular or cylindrical construction designs
• Single and multiple stage design
• Pre-quench and venturi stages available

For further details or requirements, send Enquiry

Read More

Electrostatic Precipitator Manufacturer Exporter Supplier in India Dubai Nigeria UAE Canada Bangladesh

Ylem Parto are engaged in providing Electrostatic Precipitator, which is extensively used in cement and sugar industries. Based on advanced technology, our range is used to separate dust in an electrostatic field. It collects near about 99.9% or more dust from the gas stream. Available in various specifications, these precipitators can collect dust particles and mist of any size.

We manufacture Electrostatic Precipitator, which is used to separate dust in an electrostatic field and also is used for the collection of dust particles and mist of any size. In precipitator, the gas is passed through a high voltage electric field that causes the gas to ionize.Ions are obtained, settle on dust particles and charge them. When the ions pass through an electric filed, the charged particles are attracted to the electrodes that form an electric field.



Our range comes with superior filter that is suitable for dust laden flue gases and also operates with a minimum pressure drop along with the equipment. It clean the gas then passes out of the precipitator and through a stack to the atmosphere. Precipitator mainly collects 99.9% or more of the dust from the gas stream.

Features:

• Durable
• Consistent performance
• Minimum maintenance
• Rugged construction

Application area:

• Boiler flue gas emission control
• De dusting application in steel plants
• De dusting application in cement industry
• Emission control in sugar industry
• Emission control in paper industry




For further details or requirements, send Enquiry

Read More

Plough Shear Mixer Manufacturer Supplier Exporter in India Dubai UAE Nigeria Kenya U.K. London Bangladesh Nepal

Ylem Parto offers a Plough Shear mixer consists of a horizontal cylindrical vessel with multiple plough shaped shovels mounted on the main shaft. Lump breakers and choppers are provided.

Concept
• The feed is subjected to a whirling, three-dimensional product movement
• Mixing elements are specially designed to lift the material from the inside wall of the container without squashing the particles against the wall.
• High-speed choppers installed to disperse agglomerations and control granulation during the mixing process in co-ordination with the mixing elements.
• Chopper Action : Single or multiple choppers are located in the lower part of the mixing container in such a way that the chopper assembly is inserted into the wall of the container at points in between the flights of two adjacent mixing shovels.
• The high-speed choppers remove lumps in the raw material, chop pasty additives and prevent formation of agglomerates on liquid addition.
• The choppers can be switched on and off, independent of the main drive shaft. Thus, the influence of the chopper action on the product mix can be controlled

Options
• Jacket for heating/ cooling
• Wear resistant liner plates for abrasive products
• Split design stuffing boxes, Air-purging stuffing boxes, Mechanical Seals
• Spraying system for liquid injection.
Capacity: 10-2000 Ltr

For further details or requirements, send Enquiry

Read More

Pug/Paddle Mixer Manufacturer Exporter supplier in India Iran Nigeria UAE Dubai Bangladesh Nepal United States of America

Ylem Parto offers a Pug Mixers are similar to ribbon blender except for the blade configuration. These mixers are also called as the paddle mixer. They are used for numerous processes including compounding, fine mixing, dispersing, suspending, emulsifying, deaerating, tempering, accelerating chemical or physical reactions, granulating, breaking down agglomerates.

Concept
• This is the most versatile agitator we build. It contains an equal number of forward and reversing paddles which constantly move the ingredients from one end of the mixer's tank to the other.Paddles, which move material toward the outlet, are fitted to the bottom of the tank.

• Unloading is also faster and clean out more thorough due to the fact only the forward paddles come in contact with the material in the tank when the last part of the load is being discharged.

• The paddles are positioned to move the material in opposing lateral directions as well as radially. The paddle design is generally employed where friable materials are being blended.

• Paddle blender consists of several elements: a centrally mounted horizontal shaft that rotates within a cylindrical container, paddles, ploughs or other shaped mixing elements that are attached to the centrally mounted shaft, special openings at the top for feeding materials, flush fitting access doors at the front of the mixer, a flush fitting discharge valve at the bottom of the mixer, which is pneumatically or manually operated, inside a cylindrical conduit and a complete drive unit.

For further details or requirements, send Enquiry

Read More

Ribbon Blender Mixer Manufacturer Exporter Supplier in India Iran Bangladesh Nigeria Kenya U.K. United States of America

Ylem Parto offers a Ribbon Blender comprises of a U-shaped horizontal trough and a specially designed Double Helical Ribbon Agitator rotating within. Ribbon Blenders are based on a proven agitator construction that provides a triple mixing action ensuring fast, efficient blending. The dimensions and configuration of the ribbons are carefully balanced to provide a movement of material within the container that avoids dead spots and gives rapid product discharge.

An alternate design is the paddle agitator. The paddles are positioned to move the material in opposing lateral directions as well as radially. The paddle design is generally employed where friable materials are being blended, and when batches as small as 15% of the total capacity are going to be mixed in the blender.

• The outer ribbon displaces the material from the ends to the center while the inner ribbon moves the material from the center to the ends. This counter-current action results in homogenous blending.
• The ribbons rotate at approximately 70 - 100 meters per minute and move the material both radially and laterally to ensure thorough blends in short cycle times.

Triple Mixing Action - The Key to Fast, Efficient Blending
• As the agitator rotates, the material is tumbled and carried radially around the inside of the blender.
• The pitch of the outer ribbon moves the material toward the discharge opening.
• The inner ribbon which has an opposing pitch moves the material away from the discharge opening

Standard Features
• Available in working capacity of 5 liters - 25,000 liters
• Available in all grades of stainless steel, carbon steel and special alloy steels.
• Ribbon agitator for center discharge.
• Designed for atmospheric operation.
• Top cover depending on the length of the blender.
• Centrally located Flush bottom discharge valve.
• Stuffing boxes with easily disassembled housings. Pure Teflon gland packing provided.
• Stainless steel surfaces are polished to desired standards. All exterior non-stainless surfaces are painted with enamel paint.
• Squirrel Cage, Three Phase Induction Motors suitable for 415 Volts, 50 Hz.
• Worm Reduction Gearbox.
• Single Speed Drive.
• Blender is mounted on supports providing adequate discharge clearance.

Customized Features
• Wear resistant liner plates for abrasive products.
• Ribbon agitator for multiple discharge positions.
• Manually or pneumatically operated Butterfly Valve, Slide Gate Valve, Diaphragm Valve, etc. for discharge.
• Split design stuffing boxes, Air-purging stuffing boxes, Mechanical Seals.
• Good Manufacturing Practice (GMP) models.
• Explosion-proof motors, Variable Speed Drives along with Electrical Control Panel.
• Spraying system for liquid injection.
• Lump breakers for solids or agglomerates size reduction.
• Vacuum and pressure construction.
• Jacket for heating, cooling.
• Inspection, cleaning windows on the container, cover.
• Cover openings, Nozzles as required.

Capacity: 10-2000 Ltr

For further details or requirements, send Enquiry

Read More

Crystallizer System Manufacturer Exporter Supplier in India Dubai UAE New Delhi Kenya Nigeria Iran

Ylem Parto offers  expertise covers the three types of crystallization process:

by concentration
 

by cooling (under vacuum or with a heat exchanger)
 

by reaction or equilibrium displacement

We possess the know-how and expertise for all types of crystallization equipment: with total or partial classification, involving the recirculation of the magma, with or without settling zones.

Crystallization is one way to recover or to remove a substance from a solution with a controlled level of purity and yield. Crystallization may occur during the concentration of a solution, by the reaction of chemicals or by cooling saturated solutions.



Our Crystallisation Systems:

•   Evaporative type Crystalliser
•   Vacuum Cooling Crystalliser
•   Recrystalliser type Crystalliser
•   Tank Crystalliser
•   Growth Type Crystalliser
•   Jacketed Through Crystalliser
•   Double Pipe Crystalliser

For further details or requirements, send Enquiry

Read More

Jaw Crusher Manufacturer Exporter Supplier India Bangladesh Nepal Iran Nigeria Kenya Dubai UAE

Ylem Parto offers a Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.


Operation:
The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.



Capacity: 1-60 ton/hr
Our Product range also covers:
Pebble Mill
Tube Mill



For further details or requirements, send Enquiry

Read More

Cone Crusher Manufacturer Exporter Supplier in India Russia Iran Bangladesh UAE Dubai Nepal

Ylem Parto offers a cone crusher is the cone crusher which is the earliest appearance in the world, and it is used widest and larger quantity crush mechanism in present.

Technical Data:

(1).Have many types of cavity.
Cone crusher possess special design, and the custom could select type of the cavity which has high efficiency, uniform granularity, good shape, uniform abrasion and long use life of bowl liner and mantle.

(2).Dry oil seal to prevent the dust. The cone crusher possess special seal structure, so it has credible seal effect, and prolong the cycle of the lube and use life.




(3).Choose special material to manufacture key assemblies to support large crush power.
(4).High yield. To contrast other type of the crusher, cone crusher has longer crush arm, larger stoke, larger crush power. It can crush the materiel mote efficiently.
(5).Each stroke crushes more materiel.
(6).The crush cone has long distance to bowl liner in every stroke, so the crusher allows more material get into the cavity and produces larger yield, and the materiel pass through the cavity more quickly.
(7).Low cost of daily run and maintenance. Choose the right manufacture material and structure, prolong the use life; the long crush arm to reduce the load of slip bearing, gear, and shell; the granularity of the product is uniform which reduces the cycle load; the system of cleaning cavity with hydraulic pressure is convenient , save time, low power and distribution in reason.
Instruction for manufacturing capacity Of Cone Crusher:
The capacity exertion of the crusher to some extent depends on whether the facilities are really suitably matched. The follow factors will do some help to manufacturing capacity of the crusher:
(1).To chose the right cavity.
To choose the cavity according to the size of the material, the crushed level and the request to the size of the rock.
(2).The max granularity should less than the diameter of the inlet by 0.85 times.
(3).The grade of feeding granularity should be suitable.
(4).To control the quantity of the feeding material automatically.
(5).The feeding material will be distributed evenly.
(6).The bottom of the crusher can favorably discharge the material.
(7).The material discharge strap of conveyor matches the max manufacturing capacity.
(8).The pre-ridding matches the after-ridding.

Capacity: 15-500 ton/hr




For further details or requirements, send Enquiry

Read More

Impact Crusher Manufacturer Exporter Supplier in India Nepal Bangladesh Sri Lanka Nigeria Kenya UAE Australia

Ylem Parto impact crushers are widely used all over the world. It has been proved that crushers can effectively increase productivity and final product quality. And they can also greatly reduce the investment costs and operation costs. Incomparable excellent performance is shown in the secondary crushing, tertiary crushing and material recovery.

Features of Impact crusher:
Big feeding size
Cubical shape of final product
Durable hammer
Easy maintenance
Extra large practical rotor
Reliable performance



We offers several models of high-quality impact crushers used in both primary and secondary crushing applications of aggregate, and in recycle crushing of reinforced concrete, asphalt and other construction and demolition debris. Our impact crushers are of new design that produces an excellent cubical product.This impact crusher produces a high ratio of reduction. The impact crusher is built for rug durability and simplicity of operation. Adjustment is easy from the exterior of the crusher. Maintenance is simple through inspection doors, and electric power unit is standard. Our impact crushers offer greater reliability, higher production and are ideal for portable mounting.

Capacity: 10-350 ton/hr






For further details or requirements, send Enquiry

Read More

Hammer Crusher Manufacturer Exporter Supplier India New Delhi Iran Dubai UAE Bangladesh Nepal Uttranchal

Ylem Parto offers a hammer crusher. It combines the traditional second crushing and compared with the jaw crusher and impact crusher it has advantages of high energy-saving, area-saving and low investment for once. So it is comparably advanced equipment in the current hammer crusher field. It adopts high production technology to carry out once shaping thus has the features of high efficiency and energy-saving. The product material can be adjusted according to the requirement and coarse, medium and fine material can all be got. No flake, no smoothness and multi edges and corners can guarantee the compression strength. So the product material is especially suitable for highway, construction and big project. Box hammer crusher eliminated the initial crushing of jaw crusher and is a new kind equipment of once crushing to small as well as big materials. It has high output, high efficiency, low power and can save manual and material power so as to reduce the crushing cost.



Hammer crusher can change the discharge size by adjusting the grate gap so as to meet the requirements of different customers. It has features of simple structure, high crushing ratio and high production efficiency, etc. And it can be two kinds of crushing: Dry and Wet. The main working part of box hammer crusher is the Rotator with hammer. Rotator is consisted of main shaft, round panel, pin roll and hammer. The rotator which is driving by the motor is whirling rapidly in the crushing cavity.

The material fed into the crusher from the feeding opening is hit, impacted, cut and grinded to be powder by the high speed hammer. Under the rotator, there is the screen plate. The material which is smaller than the size of screen mesh will be discharged out, while those which are bigger than the mesh size will be continually crushed and grinded by the hammer and will be finally discharged.

Features:
(1). Big feeding size. High fine crushing ratio and high efficiency;
(2). Simple structure. Compact equipped. Light weight;
(3). Even size. Little exceedingly-crushing powder;
(4). It has many advantages such as low electricity, easy maintenance, etc. So it is the ideal medium and fine crushing equipment.

Capacity: 5-150 cu. Mtr/hr.

For further details or requirements, send Enquiry

Read More

Ball Mill Manufacturer Exporter Supplier India New Delhi Iran UAE Dubai Bangladesh Nepal Nigeria Kenya

Ylem Parto offers a good range of batch type Ball Mills to crush even the hardest material like, quartz, topaz , ceramics, sillica etc. Different types & material of liners & grinding media like, Hyper steel, Stainless steel, Mn. steel, Ceramic etc. may be selected to suit the material.

Capacity: 100-11000Kgs

For further details or requirements, send Enquiry

Read More

Pulverizer Manufacturer Exporter Supplier in India Nepal Bangladesh U.K. United States Iran Nigeria Kenya

Types: Single Mill/ Double Mill/ Disc Mill Ylem Parto offer Pulverizer machines can crush all types of items, including plastic, glass, aluminum, concrete, coal, rock, resin, tires, and medical waste. Pulverizer machines come in a number of different forms. Hammer mills, ring mills, double roll crushers, granulators, impactors, and shredders are all forms of pulverizer machines. Pulverisers has fully automatic operations with predetermined sequence of operations such as Automatic granule lifter, Automatic on and off feeder, Automatic controls of mill temperature etc. The Pulverizer constitutes of high quality, maintenance-free, efficient components.

Pulverizers are available in various configurations like
Single Mill Pulverizer,
Twin Mill Pulverizer (Dual Mill Pulverizer) with various designs, sizes and shapes of pulverizer blades.
The steadily increasing demand for powders of plastic, rubber, or minerals of any kind as well as the constantly expanding quality requirements with regards to flow ability, bulk density, particle size distribution and grain structure, pulverizing systems is the best solution.

We offers pulverizing systems with specially developed controls. Sensors for temperature, pressure and power consumption register and control the system according to preset parameters.
Pulverizers produce reliable high quality plastic powders for rotation molding, whirl sintering, coatings, flame spraying processes, carpet backside coatings, extrusion and additional processes.

Constructive and process-technological characteristics of Pulverizers are:
• Grinding path made of wear resistant, technological optimized key segments
• Exact, central grinding gap adjustment
• Housing design for optimized air cooling
• Broad application field
Salient Features of Pulverizer
• By using this machine you can manufacture 30-400 Kgs batches Per/hour
• Input material size and desired output size.
• Physical properties like density, hardness, abrasiveness, moisture or oil contents, melting point etc.
• Any other special characteristics (if any) like hygroscopic, heat sensitive, explosive etc.
• The power consumption is very less compare to other pulverizing machines.
• Production cost will be cheaper.
• Low maintenance.
• Higher production capacity.
• Minimum man-power for operating the machine.
• High Quality and lower wastage
• Economical and cost effective
• Produces fine micro Powder
• Gives high output rates
• A Single person can operate easily

Standard Features of Our Pulverizer’s
• Compact design for space savings
• Hopper sensors
• Cyclone level switch
• 50 or 60 Hertz wiring available
• Heavy-duty construction
• Ease of maintenance
• Ease of operation
• Full inventory of replacement parts
• Technical assistance available .

Application:
• Dyestuff & Intermediates
• Pigments & Colours
• Chemicals
• Pharmaceuticals & Bulk Drugs
• Minerals & Others
• Foodstuff
• Spices
• Ayurvedic Herbal
• Agro Products
• Dehydrated Fruits & Vegetables
• Bakery & Confectionery
• Tobacco, Sawdust
• Tamarind Seeds
• Metal Separation
• And many more..... 

For further details or requirements, send Enquiry

Read More