Ylem Rotary Dryers and Rotary Coolers are widely used in the Industry for drying / cooling of reasonably free flowing materials.Ylem Rotary Drying Systems with various configuration.
DIRECT ROTARY DRYERS & COOLER
- Process : Material to be dried / cooled comes in direct contact with the drying / cooling media.
- Mechanism :Dryer consists of a rotating shell supported on rollers / tyres and driven by means of suitable drive arrangement. Drying / Cooling media (Air / Gas) is admitted through stationary hood at one end & taken out from stationary hood from other end.
- Feeding : Feed is admitted through suitable feeding mechanism like Screw feeder or Chute.
- Louvers : The rotating shell is provided with specially designed material showering mechanism like Lifters / Garland Chains etc.
- Inclination : Shell inclination & rotating speed facilitate forward movement of the material towards discharge end providing required residence time.
- Heat Transfer : Drying (or Cooling) takes place by heat transfer to (or from) showering material with the drying (or Cooling) media within the shell. Product is discharged from the stationary hood through suitable equipment like Flap Valve / Rotary Valve / Screw Conveyor / Chute.
Air Flow Configurations :
- Co-Current Flow
- Counter-Current Flow
Air Heating System Configurations :
Fuel Type : Direct / indirect fired air heaters using liquid / gaseous/solid fuels.
Heating Media : Direct / indirect fired air heaters using solid fuels, agro waste, saw dust, rice husk, coal, briquette etc.
Heaters Type : Indirect air heaters such as using steam / hot oil / thermic fluid/electricity.
.
Product / Fines Recovery System Configurations :
Cyclone Separators: Mono, Twin, Quadruple, Multi etc.
Bag Filters: Reverse Pulsejet, Mechanical shaking etc.
Wet Scrubbers – Direct Contact Ventury, Adjustable Ventury, Packed scrubbers etc.
Optional Features Configurations :
Feed material conditioning.
Back mixing of product with feed material.
Pneumatic conveying system and finish product handling.
Computerized control system through PLC / DCS & SCADA.
IN-DIRECT ROTARY DRYERS :
The material to be dried does not come in direct contact with the drying media.
The dryer comprises of an assembly of two concentric rotating shells supported on rollers / tyres and driven by means of suitable drive arrangement. Feed is admitted through suitable feeding mechanism like Screw feeder / Flap Valve into the dryer through stationary feed hood. The drying media is admitted through the inner shell & travel towards discharge end & again returns towards feed end through specially designed return gas passages on the inside of outer shell. The inner shell is also provided with suitable radial lifters. These lifters along with return passages geometry is designed for showering of feed material. Shell inclination & rotating speed facilitate forward movement of the material towards discharge end providing required residence time. Drying takes place by heat transfer to the showering material by direct contact with inner shell & return passages. Product is discharged from the stationary hood through suitable equipment.
Air Heating System Configurations :
Direct Fired Air Heaters : Using Liquid / Gaseous Fuels.
Direct Fired Air Heaters : Using Solid Fuels, Agro Waste, Saw Dust, Rice Husk, Coal, Briquette etc.
Product / Fines Recovery System Configurations :
Cyclone Separators: Mono, Twin, Quadruple, Multi etc.
Bag Filters: Reverse Pulsejet, Mechanical shaking etc.
Wet Scrubbers – Direct Contact Ventury, Adjustable Ventury, Packed scrubbers etc.
Optional Features Configurations :
Feed material conditioning.
Back-mixing of product with feed material.
Pneumatic conveying system and finish product handling.
Computerized control system through PLC / DCS & SCADA.
For further details or requirements, send Enquiry
